When considering the several types of thermoforming PTFE gaskets, you’ll see that there are a variety of brands and manufacturers, which there are various types of gasket and thickness too. In general, there are two different fundamental types of gasket used in this process – the heavy gauge gasket and the thin gauge gasket, and each has their goal. Be sure you understand which form of gaskets are the most outstanding option for you, if you are choosing the gaskets which you need for your thermoforming job. The following differentiations should help to make selecting the correct one easier for you.
The Thin Gauge gaskets: If the thickness of the gasket is less than 1.5 millimeters, the gaskets most commonly come from rolls of plastic. The largest uses for the thin gauge PTFE gaskets come from those who are looking for disposable packaging for his or her products.
The gaskets can go through many different forms of thermoforming processes, such as vacuum forming, to create the packaging. Depending on the thickness of the gauge it is not impossible to create either semi-rigid or rigid packaging. The thicker the gauge, the more rigidity merchandise or the package is going to have.
The Heavy Gauge gaskets: The heavy gauge gaskets are gaskets of thermoforming plastic which have a depth that is greater than 3 mm. Some gaskets can go up to 500 millimeter! Generally, the gaskets supplied by ptfe-rod.com are cut to size. People who are using the thicker gaskets in many cases are creating things which are long-lasting rather than disposable packaging. You’ll discover these thick gauge PTFE gaskets in various distinct places like in cars, shower enclosures, electronic equipments, and even medical equipment.
With the more heavy gauge thermoforming PTFE gaskets, it is essential for some hand working after the merchandise comes from the mold. You may need to trim the merchandise, drill holes, cut, or add a finish to the product. Unlike the plastic that is disposable, these are long-term (or at least semi-permanent) so it’s vital that they look their best.
Other Thicknesses: There are particular businesses which will have to have PTFE gaskets which can be of a depth that is different. Some firms may need gaskets that are between the 1.5 mm and the 3 millimeter range, and it’s possible to find those gaskets. No matter what gauge you need and no matter which sort of product you are creating, you should be able to get the thermoforming gasket that is the best size for the merchandise.
Different Sizes but the Process Remains the Same: You will see that the procedure for creating the plastic products is the same, if you’re using the thick gaskets or the thin gauge gaskets. The gaskets then formed into the form, and go over the form, warmed. Then they go through a procedure that is cooling. For thicker gaskets and the bigger, vacuum forming is the process that is most frequent.